Adhesives

For precise glue application.

Use with Precision Plastic Glue AD92 and Laser Cut Kit Glue AD87.

Contents:

-Stainless steel applicators

    -3 x 25mm, 20 gauge

    -3 x 25mm, 21 gauge

    -1 x cleaning pin

    -3 x plastic safety covers

Easy & accurate application of metal etch parts. Allows adjustment.Bonds: photo etch, plastic, painted surfaces. Water clean-up. A novel, easily spread, water-based, non-brittle adhesive designed for trouble free application of all types of photo etch to plastic. For best results dispense small amount of adhesive, allow it to thicken, then apply with small brush. Remove excess glue with water.

For light and bright covering of balsa model aeroplanes. As with all the Eze Tissue range, this paper is not only extremely light (14gsm) but has exceptional properties important for the construction of lightweight balsa wood model aircraft not found in many normal tissue papers including: high wet strength, unusually high strength to weight ratio. It is bonded easily with Deluxe Materials Tissue paste AD60 and subsequently air-proofed with Deluxe Materials Eze Dope BD42.Eze Tissuecomes in packs of 5 sheets 75cm x 50cm wide with illustrated instructions.

One part, no mixing. For creating artificial water for rivers, canals, lakes, ponds, puddles & mud. Dries rapidly in 36-48 hours. Only pour in thin layers 2-3 mm at a time. Always pre test water-based dyes & paints for adding colour. Texturable as it dries. Clean up with soap & hot water. Coverage area 150 cm2 ( 23 sq inches) at 3 mm depth.

Enhances and protects foam models. Toughens and enhances finish. Keeps the model clear for longer. Fast drying with no odour. Easy cliening with water. No mixing. Adds minimal weight.

Enhances and protects foam models. Toughens and enhances finish. Keeps the model clear for longer. Fast drying with no odour. Easy cliening with water. No mixing. Adds minimal weight.

Masking Magic OPAQUE.Perfect paint masking liquid for detailed work.Opaque for high visibility coverage. Apply by brush. Allow to dry 3-4 hours. Use on plastic and metal. It dries to a thin, visible, flexible, easily removable, paint-resisting, plastic film. Ideal for detailed work, creating clean edges even over complex contours. May be cut with sharp hobby knife, taking care not to cut into underlying paint. When dry to touch, remove film by lifting edge with knife or by pressing on adhesive tape and carefully lifting. Can be cut to create clean edges. Brushes easily cleaned with water. Works on paints and other clean, smooth surfaces. Easily peeled and removed. Non-toxic. Contents 40g.

Masking Magic CLEAR TINT.Perfect paint masking liquid for detailed work.Translucent for visibility of underlying surface Apply by brush. Allow to dry 3-4 hours. Use on plastic and metal. It dries to a thin, visible, flexible, easily removable, paint-resisting, plastic film. Ideal for detailed work, creating clean edges even over complex contours. May be cut with sharp hobby knife, taking care not to cut into underlying paint. When dry to touch, remove film by lifting edge with knife or by pressing on adhesive tape and carefully lifting. Can be cut to create clean edges. Brushes easily cleaned with water. Works on paints and other clean, smooth surfaces. Easily peeled and removed. Non-toxic. Contents 40g.

For instant reduction of friction. Smooth realistic starting and running. Realistic pull aways. Smoother low speed running. Improved running in hot and cold conditions. Safe on paint and plastic. Protects while loco is switched off. Ideal for storing. Clean, deposit free, running. Brings old locos to life.

PowerModel Smoke Oil is an environmentally friendly smoke oil that creates dramatic white smoke trails behind model aircraft powered by turbines or gasoline engines. The oil is chemically pure, with very little odour, and gives best results when injected directly into the exhaust of the engine. Its carefully optimised volatility delivers dense and highly visible smoke, with a long linger-time in the air. Gives longlasting smoke trails. Dyed for recognition. Proven with jets and gasoline engines. Non-Toxic.

PowerModel Smoke Oil is an environmentally friendly smoke oil that creates dramatic white smoke trails behind model aircraft powered by turbines or gasoline engines. The oil is chemically pure, with very little odour, and gives best results when injected directly into the exhaust of the engine. Its carefully optimised volatility delivers dense and highly visible smoke, with a long linger-time in the air. Gives longlasting smoke trails. Dyed for recognition. Proven with jets and gasoline engines. Non-Toxic.