Adhesives

4g/sq m (2 sq metres)

For laminating.

Unique fabric finish for better “wetting out” and strength. Use with Eze-Kote or Aeropoxy.

34g/sq m (1 sq metre)

For laminating.

Unique fabric finish for better “wetting out” and strength. Use with Eze-Kote or Aeropoxy.

51g/sq m (1 sq metre)

For laminating.

Unique fabric finish for better “wetting out” and strength. Use with Eze-Kote or Aeropoxy.

78g/sq m (1 sq metre)

For laminating.

Unique fabric finish for better “wetting out” and strength. Use with Eze-Kote or Aeropoxy.

Container of 250ml

Lightweight “free flowing” white powder which is mixed with polyester or epoxy resin to make an easy sanding strong filler.

Can also be used to create snow effects (smaller than 1:48) with Scatter Grip glue (AD25).

Deluxe Eze-Kote. Envase de 500 ml

Laminating and finishing resin for balsa and foam models.

Eze-Kote is a 1-part water based foam-safe, low odour, resin alternative to epoxy. Brush onto balsa and light glass cloth to create a tough, ding and fuel resistant film that can be sanded easily and painted after 20-30 mins.

Coverage: 75ml covers approx 1m2 /coat.  

Deluxe Liquid Gravity 240g

A brand new non-toxic, easy flowing, weighting system for scale military models, railway rolling stock, model planes, boats and cars. Specially designed to pour into small cavities and set in place with your favourite Roket cyano (AD43-46), or Speed Epoxy.

Deluxe Eze-Dope

A specially formulated water soluble dope for shrinking, strengthening and wind-proofing model tissue paper.

It is non flammable, has little odour and dries rapidly to a semi-matt finish. Use to apply tissue decoration to all types of foam.

Catalyst BD47 and pipette included

Tough, high gloss, 2 pack, fuel resistant lacquer.

Touch dry in 5-10 minutes for dust free finish.

Resistant to hot alcohol, gasoline or kerosene containing high nitro methane and mineral, castor, synthetic ester, or poly-glycol synthetic oils.

The next generation of strong lightweight fillers for foam and wood.

An easy sanding, strong, lightweight filler designed to fill small gaps and indentations. Easily applied and smoothed with a damp finger and then sanded back. Does not crumble like other lightweight fillers and can be over-coated with Foam Armour (BD50) for improved surface toughness, and finish before being painted.

A specially formulated wood grain sealer.

Coats and seals wood grain prior to painting and finishing. Use with all types of paints including enamel, cellulose, acrylic or epoxy.

Stir well before use. Apply with brush and allow to dry.

Sands beautifully after 60 mins.

Clean brushes with water.

Low odour and non-flammable.

· 250ml. Supply in packs of 6 units..

Deluxe Model Lite white

Container of 240 ml.

Use only where a strong joint is not required. Use for grain filling by applying with plastic sponge. Bonds: wood, foam, fibreglass. White or balsa tint for use in aeromodelling under clear covering film.