Filter By
Adhesives
Subcategories
Active filters
-
Ref: 276BD11
Deluxe Fibreglass Cloth 0.6oz 2m2
Ver Producto4g/sq m (2 sq metres)
For laminating.
Unique fabric finish for better “wetting out” and strength. Use with Eze-Kote or Aeropoxy.
-
Ref: 276BD12
Deluxe Fibreglass Cloth 1oz 1m2
Ver Producto34g/sq m (1 sq metre)
For laminating.
Unique fabric finish for better “wetting out” and strength. Use with Eze-Kote or Aeropoxy.
-
Ref: 276BD13
Deluxe Fibreglass Cloth 1.5oz 1m2
Ver Producto51g/sq m (1 sq metre)
For laminating.
Unique fabric finish for better “wetting out” and strength. Use with Eze-Kote or Aeropoxy.
-
Ref: 276BD14
Deluxe Fibreglass Cloth 2oz 1m2
Ver Producto78g/sq m (1 sq metre)
For laminating.
Unique fabric finish for better “wetting out” and strength. Use with Eze-Kote or Aeropoxy.
-
Ref: 276BD15
Deluxe Microballoons filler 250cc
Ver ProductoContainer of 250ml
Lightweight “free flowing” white powder which is mixed with polyester or epoxy resin to make an easy sanding strong filler.
Can also be used to create snow effects (smaller than 1:48) with Scatter Grip glue (AD25). -
Ref: 276BD37
Deluxe Eze-Kote 500ml
Ver ProductoDeluxe Eze-Kote. Envase de 500 ml
Laminating and finishing resin for balsa and foam models.
Eze-Kote is a 1-part water based foam-safe, low odour, resin alternative to epoxy. Brush onto balsa and light glass cloth to create a tough, ding and fuel resistant film that can be sanded easily and painted after 20-30 mins.
Coverage: 75ml covers approx 1m2 /coat. -
Ref: 276BD38
Deluxe Liquid Gravity 240g
Ver ProductoDeluxe Liquid Gravity 240g
A brand new non-toxic, easy flowing, weighting system for scale military models, railway rolling stock, model planes, boats and cars. Specially designed to pour into small cavities and set in place with your favourite Roket cyano (AD43-46), or Speed Epoxy.
-
Ref: 276BD42
Deluxe Eze-Dope
Ver ProductoDeluxe Eze-Dope
A specially formulated water soluble dope for shrinking, strengthening and wind-proofing model tissue paper.
It is non flammable, has little odour and dries rapidly to a semi-matt finish. Use to apply tissue decoration to all types of foam. -
Ref: 276BD45
Deluxe Aerokote Gloss 150ml
Ver ProductoCatalyst BD47 and pipette included
Tough, high gloss, 2 pack, fuel resistant lacquer.
Touch dry in 5-10 minutes for dust free finish.
Resistant to hot alcohol, gasoline or kerosene containing high nitro methane and mineral, castor, synthetic ester, or poly-glycol synthetic oils.
-
Ref: 276BD48
Deluxe Wonderfill 240ml
Ver ProductoThe next generation of strong lightweight fillers for foam and wood.
An easy sanding, strong, lightweight filler designed to fill small gaps and indentations. Easily applied and smoothed with a damp finger and then sanded back. Does not crumble like other lightweight fillers and can be over-coated with Foam Armour (BD50) for improved surface toughness, and finish before being painted.
-
Ref: 276BD49
Deluxe Sand n Seal
Ver ProductoA specially formulated wood grain sealer.
Coats and seals wood grain prior to painting and finishing. Use with all types of paints including enamel, cellulose, acrylic or epoxy.
Stir well before use. Apply with brush and allow to dry.
Sands beautifully after 60 mins.
Clean brushes with water.
Low odour and non-flammable.
· 250ml. Supply in packs of 6 units.. -
Ref: 276BD5
Deluxe Model Lite white 240 ml
Ver ProductoDeluxe Model Lite white
Container of 240 ml.
Use only where a strong joint is not required. Use for grain filling by applying with plastic sponge. Bonds: wood, foam, fibreglass. White or balsa tint for use in aeromodelling under clear covering film.