Filter By
Deluxe
Active filters
- Tipo de Producto: Building & Finish
-
Ref: 276BD37
Deluxe Eze-Kote 500ml
Ver ProductoDeluxe Eze-Kote. Envase de 500 ml
Laminating and finishing resin for balsa and foam models.
Eze-Kote is a 1-part water based foam-safe, low odour, resin alternative to epoxy. Brush onto balsa and light glass cloth to create a tough, ding and fuel resistant film that can be sanded easily and painted after 20-30 mins.
Coverage: 75ml covers approx 1m2 /coat. -
Ref: 276BD38
Deluxe Liquid Gravity 240g
Ver ProductoDeluxe Liquid Gravity 240g
A brand new non-toxic, easy flowing, weighting system for scale military models, railway rolling stock, model planes, boats and cars. Specially designed to pour into small cavities and set in place with your favourite Roket cyano (AD43-46), or Speed Epoxy.
-
Ref: 276BD39
Deluxe Making Waves 100ml
Ver ProductoContainer of 100 ml
For creating waves, ripples, waterfalls and moving water effects. Making Waves is a 1-part, clear setting, water based low odour resin that holds its shape, even on vertical surfaces.
It may be used to: (1) Make shallow water effects eg. streams, puddles. (2) Texture Solid Water surfaces with ripples and waves. (3) Texture Scenic Fibres for waterfalls. -
Ref: 276BD42
Deluxe Eze-Dope
Ver ProductoDeluxe Eze-Dope
A specially formulated water soluble dope for shrinking, strengthening and wind-proofing model tissue paper.
It is non flammable, has little odour and dries rapidly to a semi-matt finish. Use to apply tissue decoration to all types of foam. -
Ref: 276BD43
Deluxe Scenic Water 125ml
Ver ProductoDeluxe Scenic Water 125ml
A re-meltable one part resin that pours, flows and sets as you want it.
Best suited for small liquid projects eg. simulating drinks, or water in sinks and baths, bubbles, and many food items including jellies.
Melts at around 60˚C.
-
Ref: 276BD44
Deluxe Perfect Plastic Putty
Ver Producto40 ml. Supply in packs of 12 units.
Fills fine gaps.
Creates invisible seams. Water clean up.
Perfect Plastic Putty is a one-part, fast-drying, superfine filler with good adhesion and sanding properties on plastic. Easily used, even in awkward areas with water clean up. Apply with small spatula, smooth and allow to dry.
-
Ref: 276BD45
Deluxe Aerokote Gloss 150ml
Ver ProductoCatalyst BD47 and pipette included
Tough, high gloss, 2 pack, fuel resistant lacquer.
Touch dry in 5-10 minutes for dust free finish.
Resistant to hot alcohol, gasoline or kerosene containing high nitro methane and mineral, castor, synthetic ester, or poly-glycol synthetic oils.
-
Ref: 276BD48
Deluxe Wonderfill 240ml
Ver ProductoThe next generation of strong lightweight fillers for foam and wood.
An easy sanding, strong, lightweight filler designed to fill small gaps and indentations. Easily applied and smoothed with a damp finger and then sanded back. Does not crumble like other lightweight fillers and can be over-coated with Foam Armour (BD50) for improved surface toughness, and finish before being painted.
-
Ref: 276BD49
Deluxe Sand n Seal
Ver ProductoA specially formulated wood grain sealer.
Coats and seals wood grain prior to painting and finishing. Use with all types of paints including enamel, cellulose, acrylic or epoxy.
Stir well before use. Apply with brush and allow to dry.
Sands beautifully after 60 mins.
Clean brushes with water.
Low odour and non-flammable.
· 250ml. Supply in packs of 6 units.. -
Ref: 276BD5
Deluxe Model Lite white 240 ml
Ver ProductoDeluxe Model Lite white
Container of 240 ml.
Use only where a strong joint is not required. Use for grain filling by applying with plastic sponge. Bonds: wood, foam, fibreglass. White or balsa tint for use in aeromodelling under clear covering film. -
Ref: 276BD50
Deluxe Foam Armour
Ver Producto- Creates a hard durable surface layer on foam and wood
- Ideal for scenics, model aircraft etc.
A thick water based resin that sets to produce an attractive, durable, scratch resistant coating on foam to prevent dings, wear and disintegration. It dries to a surface that can be painted and glued easily and will reduce damage.
· 250g. Supply in packs of 6 units. -
Ref: 276BD6
Deluxe Model Lite Balsa Tint 240ml
Ver ProductoContaniner of 240 ml, Balsa Tint.
Strong, lightweight filler which sands easily.
Use only where a strong joint is not required. Use for grain filling by applying with plastic sponge. Bonds: wood, foam, fibreglass. White or balsa tint for use in aeromodelling under clear covering film.