Everships Satin Pore Covering 100ml

Apply Everships varnish on surfaces free of dust and moisture. Remove before application. Easy to apply and dries completely in 24 hours. The ideal application conditions are between 12ºC and 25ºC in a dry environment, with low humidity and protected from air currents and solar radiation. Use a flat brush or mini-roller so you don't leave any kind of marks, offering long passes that don't overlap each other, follow the grain of the wood and take care that the varnish remains evenly spread. You must wait for it to dry so that you can then sand again, removing the dust to prevent too noticeable defects or imperfections from remaining with the varnish. Drying between layers of 3-4 hours. For a perfect finish, it is recommended to sand the surface perfectly before applying the first layer of filler, sand between layers and once the last layer is dry, proceed with 320 grit sandpaper, then applying DISMOER finishing varnish. Clean tools with water.